Wall Switch Module Solid State Relay PC Board

This PC board is designed to fit where the inductor was located. Here is what the finished product looks like:

This circuit board is a convention PC board; components are mounted on the top and the copper solder size on the bottom

Here is the copper pattern I used. It is designed to be printed on a 300 DPI laser printer (HP LaserJet). The actual size of the board is 1.2 inches by 0.5 inches.

Here is the placement of the parts on the board. The alternistor in the schematic is not on this board. The alternistor will be mounted where the triac was located This a top view of the PC board.